
2002 Deckel Maho DMC125U LS5 5-Axis Universal Machining Center
Inspect machine in plant under power by appointment!
Price includes professional de-installation and shipping preparation
Price Includes loading onto your flatbed open top trucks
Machine was made in Pfronten, Germany
This machine is capable of simultaneous 5-axis and 5-sided machining because of the universal swivel head which moves continuously between vertical and horizontal spindle positions.
Heidenhain Mill Plus IT Control
Working Range
X Axis (longitudinal).....49.2" (1,250 mm)
Y Axis (transverse).....34.6" (880 mm)
Z Axis (vertical).....31.5" (880 mm)
Maximum Workpiece Contour and Height from Table Surface
Maximum Diameter.....49.2" (1,250 mm)
Maximum Height.....48.42" (1,230 mm)
Maximum Weight.....3,307 lb (1,500 kg)
Working Table (7 Pallets) NC Rotary Table
NC Rotary Table Clamping Surface.....39.4" x 31.5" (1,000 mm x 800 mm)
NC Notary Table Maximum Load.....3,307 lbs (1,500 kg)
Rotation Range of Table.....360 x 0.001 degrees (full 4th axis)
5th Axis Milling Spindle
NC Controlled B axis milling head. 4 seconds swivel time horz. -Vertical Head swivels from horizontal to vertical & vertical to horizontal position. In addition head has a NC Controlled swivel range from vertical position 0 degrees to the left -7 degrees (in direction of tool magazine) and to the right to horizontal position 180 degrees=3D187 degrees total swivel range
Main Spindle Drive
Type.....AC controlled/digital
Power 40% duty cycle (S3).....37.5 HP (28 kW)
Power 100% duty cycle (S1).....25.5 HP (19 kW)
Speed range (spindle).....10000 rpm
Acceleration/Deceleration Time.....2 seconds
Maximum Spindle Torque.....89 lb ft (121 Nm)
Spindle Bearing Diameter front/rear.....3.15"/2.16" (80/55 mm)
Spindle Taper.....HSK 100
Clamping Power.....8 kN
Feed Drives
Type.....Brushless AC/Digital
Feed Rate.....0.04-590 IPM (1-15, 000 mm/min)
Rapid Feed (x-y-z).....1,574 IPM (40 m/min)
Acceleration (x-y-z).....4.5/3.5/6.0 m/s-2
Feed Power (x-y-z).....10 kN
Ballscrews x/y/z.....50x20/40x20/40x20 mm
180 Position Tool Changer
Number of Pockets.....180
Coolant Pump
Pump Output External Jets.....10.6 gallon/minute (40 liter/minute)
Pump Pressure External Jets.....21.76 PSI (1.5 bar)
Pump Output Chip Rinsing.....47.55 gallon/minute (180 liter/minute)
Tank Volume.....238 hallon (900 liter)
Coolant Thru The Spindle
Pressure.....80 bar
Form.....Centre of the Spindle
Weight
Machine Weight with Table and Pallet Changer.....32,187 lbs (14,600 kg)
Load on Machine Base Including 2 x Workpiece Weight.....35,494 lbs (16,100 kg)
Equipped With
Automatic Pallet Changer with 7 Pallets Total
BLUM Laser Tool Length Measuring and Broken Tool Detection
MP700 RENISHAW Infrared Parts Measuring Probe
Spray Pristol with Pump
Available books, manuals, documentation
Price Quoted is in USD
ABOVE SPECIFICATIONS ARE BELIEVED TO BE CORRECT BUT IS BUYERS RESPONSIBILITY TO CONFIRM!