Royal Master GenV 5.1 Cneterless Grinder
Grinding Feed Rate - In Guide Wire Mode: 1.0" per second (25mm/second) Diameter
Capabilities: .0015" to .750"
Wire Diameter: .0001" to .250" (.02mm to 6.35mm Standard)
Usable Wheel Width: 1.5"
Linear Slide Resolution: 6349.9 Linear Counts per Inch Linear Accuracies: /- .0005" ( /-.012mm)
Diameter Resolution: .000004" (.0001mm) Diameter Accuracies: .00004" (.001mm)
Grinding Wheel Diameter: 12"
Royal Master's Generation 5 CNC Guidewire Grinding System
redefines the speed and tolerances of your stainless steel,
NiTi, and other exotic guidewires. The NEW Eyeless Sensing
System makes linear tolerances of .010" easily achievable
without sacrificing quick cycle times. The speed of griding
wires, and the accuracy achieved, comes from the position of
the wire being updated every .005" as the wire passes the
sensing pixels. Therefore there is no need to react,
calculate, or track the wire in-between photoelectric eyes.
Gaging diameter and length combinations, storing and archiving
data, quick reference and dimensioning, or offset data.
Sound complicated? All of this information is just a mouse
click away. The part is drawn through the laser at a
controlled rate, taking various samples along the body of
the part. At the conclusion of the pull, the tolerances
will be displayed in red, as the actual part configurations
will be displayed in green. Then you can save the information
into the database for future retrieval, and generate all SPC
Data, Including CPK's with a click of the mouse.