2013 Mori Seiki NTX 1000 HSC SZM
Hardly Used! Like New!
10 Axis Controlled up to 5 simultaneous
Fanuc 31iB5 Control - Absolutely loaded with software options (see photos)
Max Swing of Workpiece: 14.5"
Swing Over Cross Slide: 11.8"
Max Turning Diameter: 10.6"
Max Turning Length: 16.6"
Bar Work Capacity: 2.5"
Travels:
X Axis: 15.0, 13.0, 2.0
Y Axis: +/- 4.1
Z Axis: 18.1 +6.1
B Axis: +/- 120 degrees
X2 Axis (Turret 2): 6.1
Z2 Axis (Turret 2): 24
BW Axis: 4 Positioning Angles 0, -25, -90, -180
Spindle 1: 6000 rpm
1 spindle range
Turret 1: 20000 rpm - has this option
Min B Axis Indexing Increment: .00001 - has this option
Taper Hole of Rotary Tool Spindle: CAPTO C5
Tool Storage Capacity: 38
Tool Change Time: 1.2 seconds
Turret 2: 10 stations, all live
6000 rpm
Feed Rate Rapid Traverse: Tool Spindle X, Y 1574 ipm Z 1968 ipm
Turret 2 X2 787 ipm, Z2 1417 ipm
Spindle 2 1417 ipm
Spindle 1 Motor: 15/15/10 hp
Spindle 2 Motor: 10/7.5 hp
Tool Spindle Drive Motor: 12/7.5 hp
Turret 2 Rotary Spindle Motor: 2/1.6 hp
Electrical Power Supply: 41.2 KVA
Coolant Tank Capacity: 118 Gallon
Machine Dimensions: 100.6 W x 106.3 L x 94.4" H (not including chip conveyor)
Mass of Machine: 19800 lbs
INCLUDES
Parts Catcher
(5) od double holders and (5) id holders for lower turret
Approx 75 Capto C5 toolholders
Renishaw Tool Probe
Renishaw RMP600 Probe
Tool Presetter
3 Jaw BB208 Kitagawa chuck - main spindle
ATS 3J - dead length collet chuck - sub spindle
Ten Millionth resolution on all axes (magnetic scales)
Chip Reader (rf chip)
Post for CAMWORKS
Flood Coolant and Thru Spindle Coolant
Hardly Used: Head 1: Operation Time: 1403 hours
Cutting Time: 381 hours
Head 2: Operation Time: 1354 hours
Cutting Time: 223 hours
MACHINE UNDER POWER FOR INSPECTION
PRICE ON REQUEST!