2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)
2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)

2015 DMG MORI NHX 4000 GEN 2 RPP (5 Pallet)

Regular price
Sale price

Call 978-884-1785 or email us if you are interested in this product.

Travel

X-axis travel mm (in):  560 (22)
Y-axis travel mm (in):  560 (22)
Z-axis travel mm (in):  660 (26)
Distance from pallet surface to spindle center mm (in):  80-640 (3.1-25.2) [T-slot: 60-620 (2.4-24.4)]
Distance from pallet center to spindle gauge plane mm (in): 70-730 (2.8-28.7)

Pallet

Distance from floor surface to pallet surface mm (in):  1,050 (41.3) [T-slot: 1,070 (42.1)]
Pallet working surface mm (in):  400x400 (15.7x15.7)
Pallet loading capacity kg (lb):  400 (880)
Max workpiece swing diameter mm (in):  630 (24.8)
Max workpiece height mm (in):  Tap pallet: 900 (35.4) [T-slot pallet: 880 (34.6)]
Minimum pallet indexing angle:  0.001 degree <full 4th axis rotary table>
Pallet indexing time <including clamping and unclamping time> (90 degrees):  0.8 <full 4th axis rotary table>

Spindle

Max spindle speed:  15,000
Number of spindle speed ranges:  1
Type of spindle taper hole:  CAT 40
Spindle bearing inner diameter mm (in):  80 (3.1)

Feedrate

Rapid traverse rate mm/min (ipm):  X, Y, Z:  60,000 (2,362.2) [96,000 (3,779.5)]
Feedrate mm/min (ipm):  0-60,000 (0-2,362.2) {when using high precision control <look ahead control>}
Job feedrate mm/min (ipm):  0-5,000 (0-197) <20 steps>

ATC

Type of tool shank:  CAT40
Tool storage capacity:  Chain-type:  120
Max tool diameter <with adjacent tools> mm (in):  70 (2.7)
Max tool diameter <without adjacent tools> mm (in):  140 (5.5): chain-type
Max tool length mm (in):  450 (17.7)
Max tool mass kg (lb):  12 (26.4)
Max tool mass moment <from spindle gauge line>:  7.84 (5.78) <a tool with a mass moment greater than the maximum tool mass moment may cause problems during ATC operations even if it satisfies other conditions>
Method of tool selection:  Fixed address, shorter route access:  120 tools <chain type>
Tool changing time <tool-to-tool> s:  0.9

APC

Number of pallets:  5
Method of pallet change:  Turn-type
Pallet changing time s:  8

Power Sources

Electrical power supply kVA:  39
Compressed air supply MPa (psi), L/min (gpm):  0.5 (72.5), 420 (110.9) {when the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required}

Tank Capacity

Coolant tank capacity L(gal):  800 (211.2)

Machine Size

Approx length x width: 236 x 132 inches
Mass of machine <including coolant tank> kg (lb):  7,600 (16,720) approx 21,000 lbs with pallet system

 Highlights

  • Direct scale feedback X, Y, Z
  • High performance rear discharge external chip conveyor
  • High pressure thru spindle (chip blaster)
  • 21.5" ErgoLine (celos) control panel with multi touch monitor
  • Renishaw CMP60
  • Tool probe
  • Memory 6GB
  • Highspeed mode
  • Inverse time options
  • (4) tombstones
  • Can be inspected under power
  • Control:  Mitsubishi CNC M700BM/M700UM series
  • All available manuals included
  • Price on Request